From 5cd7242a7933f7bc6d6924072a7579f1ef8e722f Mon Sep 17 00:00:00 2001
From: Redstone1024 <2824517378@qq.com>
Date: Fri, 26 Apr 2024 23:07:02 +0800
Subject: [PATCH] docs(readme): add printing details for
 CylinderFan-Master-FanMount.stl

---
 README.md | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/README.md b/README.md
index 7f66fc6..eef18a2 100644
--- a/README.md
+++ b/README.md
@@ -48,6 +48,8 @@ You can refer to the following procedure to verify that the PCB is working, and
 
 **CylinderFan-Master-Body.stl** - Position the fan upward and add support to the lower **plane** at the lanyard.
 
+**CylinderFan-Master-FanMount.stl** - Add a cylinder to the large center hole, set up layer 0 top, bottom, and walls with 15% honeycomb fill.
+
 **CylinderFan-Nozzle-\*.stl** - Add support to the outer circle below. Pause the print and add the magnet while the magnet hole closes the layer.
 
 **CylinderFan-Electronic-Body.stl** - Print the LED translucent faces with a white filament. Add support to bottom slide.